Phone Number +91-9892534043

Industrial Hot Air Oven

Industrial Hot Air Ovens are designed for continuous operation.

Double Walled Construction. Outer Body made of Mild Steel Duly Powder Coated. Inner Body made of Stainless Steel SS 304. Wire Rod Trays / Shelves will be made of SS 304. The gap between the walls is filled with Glass wool insulation. Heating is by suitable air heater placed on both the sides of Oven.

Temperature is controlled by Digital PID Temperature Controller. Forced Air Circulation will be provided by Motorized Fan at the top of the oven. Suitable Door Gasket will be provided to minimize heat loss.

Technical Specification

Design & Scope The Hot Air Oven is manufactured and tested to suit the specifications given in I.S.I and calibrated against E.R.T.L (w) standards
Controller Digital dual display temperature controller cum indicator
Temperature Range Ambient to +5°C to 250°C Accuracy ± 1°C
Temperature Uniformity ± 2°C
Temperature Sensor PT100 (Rtd)
Heating Elements Heating Element are placed at Left and Right Side, Fan at Top Side.
Alarm System Alarm system For Temperature Variation And Power Failure
Insulation 250 mm Insulation with Glass Wool
Door system Outer Metallic Door with Gasket to Close The Door Properly.
Trays SS 304 Trays made with square steel pipe corners and fitted with wire rods.
Safety Features A.MCB for mains supply.
B. Safety Controller for high temperature cut off all heater
Power Supply 230 Volts , 50 Hz , Single phase.

Application : Paint baking, curing, baking of material, motor heating, transformer heating, annealing, post curing and drying.